Finished the carb rebuild. Next job was to get them on the bike. This was more difficult than I realised, especially as I had bought the bike with no air box and I had no idea how they had come apart.
Now how does this all go into here?
I put the carb boots on first and lined them up.
Not much room in here to move the air filter box around so I took off both of the electrical plates either side to allow greater movement.
And then got the carbs in and connected the throttle and choke cables. It should be noted that you should put the fuel pipe and breather pipes on before you put the carbs in as it is a real pain to try and do it afterwards.
No comments:
Post a Comment